Powder packaging machine should pay attention to daily maintenance and maintenance, not only can prolong the service life of equipment, reduce the occurrence of failure and so on. PUDA offers a few suggestions:
1. Regularly inject oil into the meshing place of the gears of the host machine, the oil-filling hole of the bearing with the seat and the moving parts for lubrication. No oil-free operation of the reducer is allowed. When lubricating oil is added, do not drop oil on the transmission belt, because it will cause the powder packaging machine to slip and lose rotation or premature aging of the belt damage.
2. After the shutdown, clean the metering part in time, scattered materials should be cleaned up in time, often clean the dust in the electric control box, to prevent short circuit or poor contact and other electrical faults.
3. Check the screws at all parts of the powder packaging machine frequently to prevent the loose screws from affecting the normal long rotation of the machine. Ensure that the electrical cabinet and wiring terminals are clean and dry.
